|
Post by walkercoonhunter on May 23, 2011 20:46:46 GMT -5
ok guys i need some measurments for baseplates...
i need the width and length of the base of the trap so i can make base plates to fit these traps...
#2 bridger with the 1 inch wide base plate i need the length
1 1/2 bridger need width and length
i see there are different measurments for the 1.75 victor old style vs the new style..and body know what the difference is?
|
|
|
Post by Fluff747 on Jun 6, 2011 0:20:20 GMT -5
walker , take a tape and measure the trap base and add a 1/8-1/4 to it , it all depends on your bender as far as the width , they will be 3/4 on the 1 1/2 size traps and 1 in on the #2 size and up traps , hope this helps ,,,, Fluff
|
|